Caps Orientation System, Inclined Band.

The OTB series consists of lids orientation system, which has a storage hopper and is equipped with a band with a variable inclination angle for the orientation of the lids. This equipment must be used in conjunction with a screw-in or capping system for pressure caps.

Share:

Share on facebook
Share on twitter
Share on linkedin
Share on email
Share on whatsapp

Description

Caps Orientation System, Inclined Band.

TECHNOLOGY
The technology of this type of liner guides consists on an inclined band, equipped with buckets, which drags the lids and, depending on their orientation, they remain in the band, or fall back to it.
This type of orientation is focused on covers whose height is not larger than its diameter and the top of the lid is flat.
It is a very practical and simple system to adjust; In addition, the team has an interchangeable cheek system to guide different types of lids.

USES AND/OR APPLICATIONS
For the orientation of cylindrical covers whose height is not greater than its diameter and whose upper part is flat. For caps from 20 to 50 mm in diameter. Special executions are offered for lids, for ?non-refillable? liquors, or caps whose height is greater than the diameter.

Foods
Oil and Lubricants
Pharmaceutical
Paintings
Flavored liquid
Agrochemicals
Cleaning products
Natural products
Alcoholic liquid
Cosmetics

CAUTION
This type of equipment is not suitable for containers larger than 5 lt. It is necessary to consult with Equitek the minimum and maximum capacity of the containers? size, according to the project.

Additional information

Solution

Cap diameter

20 to 60

Electrical Requirement

220V 50/60 Hz

Compressed air requirement

92.45 psi

Optional

440V-3F 50/60hz

Caps Orientation System, Inclined Band.

Share on facebook
Share on twitter
Share on linkedin
Share on email
Share on whatsapp
SKU 25 Category

Contact Us

Want to ask more about our machinery, just fill the form below and submit.

Open chat
Hi